Configuring Remote IP Cameras
Configuring Remote IP Cameras Remote Device Setup with POE switch Some installations may require cameras to be added to the NVR over the network. This may be the case if the NVR doesn't have POE ports, or if a wireless bridge is involved in the installation. In this case the cameras need to be added to the NVR via a different method, see below for details. Important Note If this is a business installation, please make sure you consult with the Manager and/or IT department before installing any devices that will need to be connected to the network. Installing a network device without approval and prior knowledge of how the network is setup, has the potential to cause critical devices to fail, bring down the network and even stop business' server/software from operating. Please be advised the following instructions are only true for simple networks Warning When connecting cameras over the network, they must only connect to the NVR's LAN Port as shown in the above diagram. ...